View E18410-3C90-A315-E_4597461.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SH EET A SHEET
E18/4/10 Planar E cores and accessories
Supersedes data of February 2002 2004 Sep 01
Ferroxcube
Planar E cores and accessories
CORES Effective core parameters of a set of E cores SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.616 960 24.3 39.3 39.3 2.4 UNIT mm-1 mm3 mm mm2 mm2 g
handbook, halfpage
E18/4/10
18 0.35 14 0.3 4 0.1 2 0.1 4 0.1
10 0.2
R0.8 (12x)
CBW297
Dimensions in mm.
Fig.1 E18/4/10 core half.
Effective core parameters of an E/PLT combination SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of plate VALUE 0.514 800 20.3 39.5 39.5 1.7 UNIT mm-1 mm3 mm mm2 mm2 g
handbook, halfpage
18 0.35 2 0.05
Ordering information for plates GRADE 3C90 3C92 3C93 3C94 3C96 3F3 3F35 3F4 3F45 3E6 2004 Sep 01 TYPE NUMBER PLT18/10/2-3C90 PLT18/10/2-3C92 PLT18/10/2-3C93 PLT18/10/2-3C94 PLT18/10/2-3C96 PLT18/10/2-3F3 PLT18/10/2-3F35 PLT18/10/2-3F4 PLT18/10/2-3F45 PLT18/10/2-3E6 2
Dimensions in mm.
10 0.2
R0.8
CBW298
Fig.2 PLT18/10/2.
Ferroxcube
Planar E cores and accessories
E18/4/10
Core halves for use in combination with an non-gapped E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 10 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE 3C90 AL (nH) 100 3% 160 3% 250 5% 315 8% 3200 25% 3C92 3C93 3C94 2330 25% 2700 25% 100 3% 160 3% 250 5% 315 8% 3200 25% 3C96 3F3 2900 25% 100 3% 160 3% 250 5% 315 8% 2700 25% 3F35 3F4 2200 25% 100 3% 160 3% 250 5% 315 8% 1550 25% 3F45 3E6 1550 25% 13500 +40/-30% e 49 78 123 154 1560 1140 1320 49 78 123 154 1560 1410 49 78 123 154 1320 1070 49 78 123 154 760 760 6600 AIR GAP (m) 800 420 220 170 0 0 0 800 420 220 170 0 0 800 420 220 170 0 0 800 420 220 170 0 0 0 TYPE NUMBER E18/4/10-3C90-A100-E E18/4/10-3C90-A160-E E18/4/10-3C90-A250-E E18/4/10-3C90-A315-E E18/4/10-3C90 E18/4/10-3C92 E18/4/10-3C93 E18/4/10-3C94-A100-E E18/4/10-3C94-A160-E E18/4/10-3C94-A250-E E18/4/10-3C94-A315-E E18/4/10-3C94 E18/4/10-3C96 E18/4/10-3F3-A100-E E18/4/10-3F3-A160-E E18/4/10-3F3-A250-E E18/4/10-3F3-A315-E E18/4/10-3F3 E18/4/10-3F35 E18/4/10-3F4-A100-E E18/4/10-3F4-A160-E E18/4/10-3F4-A250-E E18/4/10-3F4-A315-E E18/4/10-3F4 E18/4/10-3F45 E18/4/10-3E6
2004 Sep 01
3
Ferroxcube
Planar E cores and accessories
E18/4/10
Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 20 10 N, using a PCB coil containing 4 layers of 8 tracks each, total height 1.6 mm. GRADE 3C90 AL() (nH) 100 3% 160 3% 250 5% 315 8% 3680 25% 3C92 3C93 3C94 2690 25% 3100 25% 100 3% 160 3% 250 5% 315 8% 3680 25% 3C96 3F3 3250 25% 100 3% 160 3% 250 5% 315 8% 3100 25% 3F35 3F4 2500 25% 100 3% 160 3% 250 5% 315 8% 1800 25% 3F45 3E6 1800 25% 15500 +40/-30% e 41 65 102 129 1500 1100 1270 41 65 102 129 1500 1320 41 65 102 129 1270 1020 41 65 102 129 740 740 6400 AIR GAP (m) 870 470 240 170 0 0 0 870 470 240 170 0 0 870 470 240 170 0 0 870 470 240 170 0 0 0 TYPE NUMBER E18/4/10-3C90-A100-P E18/4/10-3C90-A160-P E18/4/10-3C90-A250-P E18/4/10-3C90-A315-P E18/4/10-3C90 E18/4/10-3C92 E18/4/10-3C93 E18/4/10-3C94-A100-P E18/4/10-3C94-A160-P E18/4/10-3C94-A250-P E18/4/10-C94-A315-P E18/4/10-3C94 E18/4/10-3C96 E18/4/10-3F3-A100-P E18/4/10-3F3-A160-P E18/4/10-3F3-A250-P E18/4/10-3F3-A315-P E18/4/10-3F3 E18/4/10-3F35 E18/4/10-3F4-A100-P E18/4/10-3F4-A160-P E18/4/10-3F4-A250-P E18/4/10-3F4-A315-P E18/4/10-3F4 E18/4/10-3F45 E18/4/10-3E6
2004 Sep 01
4
Ferroxcube
Planar E cores and accessories
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 320 320 300 300 300 300 f = 100 kHz; B = 100 mT; T = 100 C 0.105 0.095 0.085 0.075 0.085(1) 0.075(1) 0.085 0.075 0.065 0.06 0.11 0.09 - - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 100 C - - 0.6 0.5 0.6(1) 0.5(1) 0.6 0.5 0.45 0.4 - - - - f = 400 kHz; B = 50 mT; T = 100 C - - - - - - - - 0.18 0.15 0.19 0.16 0.09 0.08
E18/4/10
f = 500 kHz; B = 50 mT; T = 100 C - - - - - - - - 0.35 0.3 - - 0.13 0.12
E+E18-3C90 E+PLT18-3C90 E+E18-3C92 E+PLT18-3C92 E+E18-3C93 E+PLT18-3C93 E+E18-3C94 E+PLT18-3C94 E+E18-3C96 E+PLT18-3C96 E+E18-3F3 E+PLT18-3F3 E+E18-3F35 E+PLT18-3F35
Measured at 140 C.
1.
Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 300 300 250 250 250 250 f = 500 kHz; B = 100 mT; T = 100 C 1.0 0.9 - - - - CORE LOSS (W) at f = 1 MHz; B = 30 mT; T = 100 C - - 0.3 0.24 0.2 0.16 f = 1 MHz; B = 50 mT; T = 100 C - - - - 0.48 0.4 f = 3 MHz; B = 10 mT; T = 100 C - - 0.45 0.39 0.35 0.3
E+E18-3F35 E+PLT18-3F35 E+E18-3F4 E+PLT18-3F4 E+E18-3F45 E+PLT18-3F45
2004 Sep 01
5
Ferroxcube
Planar E cores and accessories
MOUNTING INFORMATION
E18/4/10
R 0.8 max.
handbook, 4 columns
4.25 min.
10.4 min.
13.5 max.
CBW551
18.5 min.
Fig.3 Recommended PCB cut-out for glued planar E18/4/10 cores.
2004 Sep 01
6
Ferroxcube
Planar E cores and accessories
BLISTER TAPE AND REEL DIMENSIONS
E18/4/10
K handbook, full pagewidth0 T D0
P0 P2 E
cover tape B0
F S W
A0 P1
D1 direction of unreeling
CBW404
For dimensions see Table 1.
Fig.4 Blister tape.
Table 1
Physical dimensions of blister tape; see Fig.4 DIMENSIONS (mm) 10.5 0.2 18.7 0.2 4.5 0.2 0.3 0.05 32.0 0.3 1.75 0.1 14.2 0.1 1.5 +0.1 2.0 4.0 0.1 16.0 0.1 2.0 0.1 28.4 0.1
SIZE A0 B0 K0 T W E F D0 D1 P0 P1 P2 S
2004 Sep 01
7
Ferroxcube
Planar E cores and accessories
E18/4/10
cover film
handbook, full pagewidth
direction of unreeling
blister tape
CBW405
Fig.5 Construction of blister tape.
direction of unreeling leader 552 mm
handbook, full pagewidth
trailer
minimum number of empty compartments
cover tape only
CBW406
Leader: length of leader tape is 552 mm minimum covered with cover tape. Trailer: 160 mm minimum (secured with tape). Storage temperature range for tape: -25 to +45 C.
Fig.6 Leader/trailer tape.
2004 Sep 01
8
Ferroxcube
Planar E cores and accessories
E18/4/10
handbook, full pagewidth
W2
20.5
12.75
0.15 N 0
A
MSA284
W1
Dimensions in mm. For dimensions see Table 2.
Fig.7 Reel.
Table 2
Reel dimensions; see Fig.7 DIMENSIONS (mm)
SIZE A 32 330 N 100 5 W1 32.4 W2 36.4
2004 Sep 01
9
Ferroxcube
Planar E cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
E18/4/10
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2004 Sep 01
10

▲Up To Search▲

Price & Availability of E18410-3C90-A315-E

	To Download E18410-3C90-A315-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .